• Axiom AX2010AWH white finish (rendering; actual product and color may vary)

Axiom · Stage Equipment

Dual 10", Active, High-Output, Powered, CORE Processed, Vertical Array Element (White)

Item AX2010AWH · Made in Italy

A white powered dual 10-inch line array element with two 1.4-inch compression drivers, CORE2 DSP and 1400 W + 1400 W of Class D power.

Where to Buy

Axiom systems are specified, sold and installed by authorized integrators and installers in the USA and Canada.

Request a System Quote
Find an integrator or installer near you
Dealer? Sign in to see your cost and order.

Details

About this product.

Overview

The AX2010A combines strong sound quality with simple, flexible setup. It is built for rental live sound and fixed installations.

  • High-output line array element with a compact size and high output-to-weight ratio
  • High-quality, low-compression, low-distortion HF drivers
  • Very stable horizontal coverage
  • Transmission line back loading for clean mid-bass
  • Transmission line HF waveguide for natural sound projection
  • 40-bit floating-point CORE2 processing with PRONET AX remote control
  • Class D amplifier module with SMPS and PFC

Transducers

Two low-distortion compression drivers with very light diaphragms reproduce the high frequencies. Two transmission line waveguides load them for detailed, natural sound and long HF throw.

Two 10" woofers with light cones and aluminum voice coils handle the mid-bass. The aluminum coils speed up midrange response, improve thermal capacity and control power compression.

A short hybrid transmission line back-loads the woofers. It reduces box resonances and avoids the boxy mid-bass of typical bass-reflex enclosures.

System design

The symmetrical woofer-tweeter-woofer layout is engineered to minimize beaming around the crossover. The HF diaphragms' low resonance allows a crossover point near 900 Hz.

Woofer orientation reduces interference between the two woofers, and a polyurethane acoustic filter further limits midrange beaming. A constant power crossover keeps horizontal coverage and the off-axis image very stable.

Phase linearization adds a linear phase response and coherent time response. Acoustic instruments and voices sound natural, with better depth in the sound image.

Processing and power

The CORE2 DSP platform, designed by Proel R&D, uses a 40-bit floating-point SHARC DSP. Its 24-bit AD/DA converters deliver more than 110 dB of dynamic range.

PRONET AX software runs on a CANBUS network for remote EQ, delay, protection settings and amplifier monitoring.

The Class D amplifier with SMPS and power factor correction delivers 1400 W + 1400 W. It offers high dynamics, low distortion and a compact size.

Product image is a rendering of the white finish. Actual product and color may vary.

Specifications

The details that matter.

System

System’s Acoustic Principle
Line Array Element
Short Transmission Line LF Back Loading
Acoustic Transmission Line HF Waveguide
Frequency Response (±3dB)
75 Hz – 18kHz (Processed)
Horizontal/ Vertical Coverage Angle
110° (-6dB) / 10° (-6dB)
Maximum Peak SPL @ 1m
138 dB

Transducers

LF
Two 10”(260mm), 2.5” (64mm) aluminum voice coil, 16Ω each, paralleled
HF
Two 1.4” drivers, 2.5” (64mm) edgewound voice coil, titanium diaphragm, 16Ω each, paralleled

Electrical

Input Impedance
20 kΩ balanced, 10 kΩ unbalanced
Input Sensitivity
+4dBu / 1.25 V
Signal Processing
CORE2 processing, 40bit floating point SHARC DSP, 24 bit AD/DA converters
Direct access Controls
4 Presets (Standard/Long Throw/Down Fill-Single Box, User), Network Termination, GND Link
Remote Controls
PRONET AX control software
Network protocol
CANBUS
Amplifier Type
Class D with SMPS and PFC
Output Power
1400W + 1400W
Mains Voltage Range (Vac)
100 - 240 V~ ±10% 50/60 Hz
IN / OUT Connectors
Neutrik XLR-M / XLR-F
IN / OUT Network Connectors
ETHERCON®(NE8FAV)
Mains Connector
PowerCon® (NAC3MPA)
Mains Link Connector
PowerCon® (NAC3MPB)
Cooling
Variable speed DC fan

Enclosure & Construction

W x H x D
29.37 in (746 mm) x 13.42 in (341 mm) x 20.86 in (530 mm)
Enclosure Material
0.6 in (15mm), reinforced Phenolic Birch
Paint
High resistance, water based paint

Suspension system

Front Suspension
Aluminum Fast Link structure
Back Suspension
High Strength Steel with ¼ Fast Pin
Net Weight
90.4 lb (41 kg)

Warranty

Standard
2 years from the date of purchase at an authorized Proel North America dealer
Extended
2 more years (4 in total) when registered on proel.com within 6 months of purchase
Details
Terms, registration links and claims: proelnorthamerica.com/pages/support